"Why did we write this article? At Greatvacs we are the largest rebuild warehouse in the US. We have serviced and rebuilt over 50,000 high-end vacuums. We get asked all of the time "How to perform basic vacuum maintenance on your Prolux Iforce bagless canister vacuum." so we decided to make this video and article for you. Enjoy :)"
EMPTYING THE IFORCE DIRT BIN:
To empty the Iforce vacuum press the release button.
Place it over the trash can. Release the trapdoor by pressing the grey release button.
Close the trapdoor.
Then reinstall the dirt bin back to vacuum.
REPLACING PRE-MOTOR FILTERS:
Remove the dirt bin from the vacuum by pressing the release button.
You’ll need to twist the handle to the left and just slightly pull.
Pull the pre-motor filter out
Install your new premotor filter.
Put the handle back and twist it to the right or counterclockwise.
Reinstalled the bin back onto the vacuum.
REPLACING POST-MOTOR FILTERS:
The post-motor filter is hidden inside the round portion of the giant wheel.
Twist it counterclockwise.
Remove the post-motor filters.
Grab the new one and installed it into the filter compartment.
Put the giant wheel back on counterclockwise and you’re done.
If you want to learn more about our products please visit GreatVacs.com or send us an email at service@greatvacs.com and we will gladly assist you!
